ALR hydraulic tension and compression test stand

ALR hydraulic tension and compression test stand

Features

ALR manual hydraulic testing machine is equipped with HF series force gauges, manual operation, using hydraulic jacks to achieve large load test force test, the operation is simple and stable.And can be combined with different fixtures into different uses of tension and compression load testing machine.

specification

note

1. The test stand can be ordered according to the specifications required by the user;

2. The dynamometer in the figure needs to be ordered separately;

3, please install the sensor, machine, jack.When the test is used, the direction of tension and compression load should be at the center of the table.

caveat

1. During the destruction test, protective masks and gloves shall be worn to prevent spatters generated during the test;

2. Do not use a damaged or bent fixture.When using a fixture that has been damaged or bent, it may fall off or break, and the test object may fall off.Therefore, you must be very careful not to hurt your body.

3, do not exceed the use of push-pull sensor load range, or the sensor will be damaged, excessive load may collapse the sensor and cause an accident.

Other supporting equipment