Fertility/pH/Moisture/TEMP/Sunlight / Humidity 6 in 1Soil Meter

Instructions for Use:

1. Remove the product, unscrew it, open the battery cover on the back and install two AAA batteries; press the power button and the test interface will appear normally.

2. Remove surface debris from the soil, avoiding stones or other hard objects. Hold the product firmly and insert the probe vertically into the soil to about 2/3 of its depth. Do not shake it; ensure the probe makes full contact with the soil.

3. Press the test button. The value will start flashing. Wait for it to stabilize, then read the value. Briefly press the temperature button to switch to Celsius, then briefly press the temperature button to switch to Fahrenheit, and repeat the cycle.

Precautions for Use

1. Do not insert the product's metal probe into very hard soil or other hard objects, as this may damage the probe;

2. This product is only suitable for testing soil and cannot be used to test pure water or other liquids;

3. Do not insert the probe into the soil for extended periods, as this may corrode the probe and affect data accuracy;

4. Clean the probe promptly after use to ensure it remains clean;

5. Test data may vary depending on soil depth. It is recommended to perform multiple tests and take the average data;

6. When testing fertility or soil pH, the soil to be tested must be kept moist.