KRC-150CL low temperature incubator

KRC-150CL low temperature incubator

Purpose:

This series of products are widely used in storage culture media, serum, medicines and microbial culture, environmental testing, etc.

Features:

1. LCD temperature controller, PID controls temperature and humidity, the data is accurate and reliable.

2. Made of high-quality stainless steel inner liner, with semi-circular arcs at four corners, easy to clean, and the spacing between the partitions in the incubator is adjustable.

3. All imported compressors, environmentally friendly fluorine-free refrigerant (R404a), low energy consumption, promote energy saving.

4. There is a 25mm diameter test hole on the left side of the incubator to facilitate experimental operation and temperature measurement.

5. Set up an independent temperature limit alarm system, which will automatically interrupt when the temperature exceeds the limit to ensure the safe operation of the experiment and avoid accidents.

6. LCD program temperature controller can be set to 99 cycles and 30 sections, each section time is 1-9999 hours or minutes (optional).

Parameter data:

Conditions of no-load performance test: ambient temperature: 20℃, and ambient humidity: 50%RH;

Can customized 800L to 1000L low temperature incubator;

Options:

1. Intelligent program LCD temperature controller；

2. Independent temperature limit controller；

3. BOD socket；

4. Printer;